The problem is that you can’t test it with a duff tube, so you’re basically buying blind it could be the PSU or something else on the way out. A floppy drive and sneakernet should work fine, most of my files are under 45kb. It does have serial ports and a modem, plus 3. The Summit is a model vs. Their support is indeed great but that is a very old machine and I do think they stop supporting things at some point. So far it’s working correctly, but the software seems a bit clunky. Back to home page.

Uploader: Doujar
Date Added: 3 April 2005
File Size: 39.82 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 12011
Price: Free* [*Free Regsitration Required]

So far I’ve installed 3″ casters on the cart for easy moving, and the old, slow PC works fine.

Replacement laser for EPILOG SUMMIT 25 watt laser engraving machines. Air cooled

Similarly if you wish to distribute this post to anyone who may be interested feel free. I know many of these are from china but, they are not good to go out of the box?

Older versions of CorelDraw can be found on surplus software sites but you do have to spend some time searching. I saw your web site and you have some fine miniature grandfather clocks. With that setup, Summot sent the files to the laser via Ethernet.

I’m completely new to this and didn’t have time to prepare for the laser’s arrival– I had to act fast! Sign in for more lists.

Replacement laser for EPILOG SUMMIT 25 watt laser engraving machines. Air cooled

I’ve no doubt that it can do all the things shown in the listing but wonder how much tinkering it needs and what summit you need to make. I’m also looking at these forums: If you look under the “Settings” tab on the interface above the download button in phCAD and read those “parameters” then you might get somewhere.

Recent Drivers  JAZZ JAZZ JDC9 2000 SERVER DRIVER DOWNLOAD

Seller assumes all responsibility for this listing. If anyone wants to know more please feel free to ask.

Adafruit customer service forums • View topic – Laser engraver: taking the low road

It is quite possible that “suspects that the tube will need to be replaced soon” really means “the tube should have been replaced years ago”. Check out the new wiki for the K40 laser cutter!

Do use the laser to cut those too? The second mirror is mounted on a piece of all-thread, the laser tube looks like it’s mounted with a single metal strap and the screws for the USB jacks aren’t even counter sunk properly. USB but no ethernet!

Epilog Summit Driver Downloads

Triumph kept insisting that the “parameters” were set incorrectly – what they failed to point out is that the “parameters” which we loaded onto the machine from the manufacturer’s option dropdown menu and which they kept sending us were NOT the only “parameters”.

Feb 17, Everything else including the miniature grandfather clock was done with a scroll usmmit You can try a software relocation program to move your current version epi,og a new PC. However I have seen some people say that they need a lot of work to be made useable, but have not seen much on what all is typically done to make them useable. See full item description.

Anyway if alec01 is following this thread then the settings you need are or at least the settings culled from our machine are Work Paramaters Space Speed – I’ve sifted through the posts here– great info! My Halon extinguisher has lost pressure so I keep a Tundra brand spray can extinguisher near the machine but the best thing is to not leave the room. Epilog Summit depending on model is an old, low powered model. Any information about lower cost machines would be most appreciated: This amount is subject to change until you make payment.

Recent Drivers  CANNON SD800 DRIVER DOWNLOAD

This would be used primarily for my own projects and experiments, but I would likely offer some services like “tech tattoos” if I can get something working reliably.

I’ve done some simple testing on tongue depressors, thin acrylic sheet, paper, cardboard, a banana, and a tortilla: No clue how to set up the rotary attachment; I mailed Epilog for information, hoping I can get a PDF or printed manual.

BCook65 Electricity is your friend and your friend needs a hug I called Epilog yesterday and they were very helpful– they sent me a Summit manual from an old stack, I pay only for shipping.

Have thought about doing the internal cuts with the laser and just doing a mark line for the outside cuts and then cutting the outside with the scrollsaw like I do with the dog signs.

Of course I would prefer an Epilog– I can only find raves about it searching online– but the lowest prices are too high for me to consider at the moment.